From 0 to 1 Raspberry Pi and the Internet of things

LikeEduswitchPage

Introduction

An Internet-Of-Things course for everyone - accessible yet serious, to take you from absolute beginner to a solid intermediate level - built around Home Automation using Raspberry Pi. This is a course is for everyone. You need not be an electrical engineer, or an engineer at all. We explain all engineering or automation concepts from absolute scratch. This is an Internet-of-Things course, not merely a Raspberry Pi course. This is important because we think too many courses end up becoming like manuals for the Raspberry Pi, or the Arduino, or some specific hardware device. The course takes you to a solid intermediate level. The objective is to get you to a point where if you imagine a really cool IoT application, you will be able to independently figure out how to implement it. We focus on Home Automation using Raspberry Pi for our use-cases. This is so that you can immediately put it to use around the home (turn that music down without getting off the couch!) As with all our courses, this one too is quirky. The examples are irreverent. Lots of little touches: repetition, zooming out so we remember the big picture, active learning with plenty of quizzes. There’s also a peppy soundtrack, and art - all shown by studies to improve cognition and recall. What are the requirements? No real prerequisites. Beginner level understanding of electric circuits and programming might help but its not mandatory. If you intend to do the physical computing projects, go ahead and purchase a Raspberry Pi - but the course does give you advice on things you might need to get for your automation projects so you can wait to decide as well.

Description

Internet of Things : Sensors, Actuators, Microcontrollers, Arduino, Raspberry Pi, Physical Computing, Smart homes. Raspberry Pi 2 Model B Components, System on a Chip (SOC) , Input Output Interfaces, SD Card / Secondary Storage, Choice of Operating Systems, RISC/CISC Architectures, x86 vs ARM, Raspbian OS installation, Raspbian tour, Linux Shell commands overview, Installing softwares, Connecting to the Internet. Physical Computing: Sensors (Photoresistors, Ultrasonic sensors, motion sensors, temperature and humidity sensors), Relays, LEDs, Push buttons, Basics of circuit design, Ohm's law, RC circuit, GPIO pins, Serial and Parallel interfaces, UART, SPI, I2C, Pulse Width Modulation (PWM), Python (RPi DOT GPIO), WiringPi, Node js (RPi-GPIO). Home Automation projects: Measuring Distance, Measuring Light Intensity, Controlling switches with sensors, Controlling switches over local and external networks.

Goal of Course

What am I going to get from this course? Understand what the internet of things and physical computing are. Know their way around a Raspberry Pi. Use the Raspberry Pi in Home Automation projects. Think of different IoT applications and visualize the components needed to build them. Do cool things like control switches in their home with their smartphone.

What this course is about

What is the Internet of Things?

Pi's Anatomy

Getting Started

Coding with Python - It's easy as Pi

Physical Computing with the Raspberry Pi

For Arduino lovers: WiringPi